Tämä tyyppiä physics oleva kuva pitäisi luoda uudelleen SVG-tiedostoksi vektorigrafiikan avulla. Tällä tiedostotyypillä on monia vahvuuksia, sivulta Commons:Media for cleanup löytyy lisätietoja. Jos tästä kuvasta on jo olemassa SVG-versio, ole ystävällinen ja tallenna se tänne. SVG-tiedoston tallentamisen jälkeen vaihda tämä malline mallineeseen {{vector version available|uusi kuvan nimi.svg}}.
Yhteenveto
KuvausFEM example of 2D solution.png
This is an example of a two-dimensional FEM (finite element method) solution for a cylindrically shaped magnetic shield. In this case "two dimensional" means that the picture shows a flat cross section of an assembly that extends to a large distance at right-angles to the paper (Cartesian coordinates). The rectangle outlined at the right of the picture is the component carrying the electrical current that creates the magnetic field. The cylindrical part is a material of high magnetic permeability (for example iron) and is shielding the area inside the cylinder from magnetic field by diverting the magnetic field. The curved lines represent the direction of magnetic field (or more specifically, lines of B, magnetic flux), and the color represents the magnetic flux density, as indicated by the color scale in the inset legend. Red is high amplitude, where the flux lines are more closely spaced. The color scale does not indicated the units, although it is possible they are Tesla. In the legend the vertical lines beside the 'B' indicate that the value plotted is the magnitude of the vector quantity B. The annotation "smoothed" indicates that the segmented lines (created by dividing the space into separate elements) have been smoothed for a more natural and correct appearance. The area inside the cylinder is low amplitude (dark blue, with widely spaced lines of magnetic flux)), suggesting that the shield is performing as it was designed to. See also Image:Example of 2D mesh.png
Päiväys
6. heinäkuuta 2007 (tallennuspäivä)
Lähde
Self-made using Infolytica Corporation's MagNet software
I, Zureks, tämän teoksen tekijänoikeuksien haltija, julkaisee täten tämän teoksen seuraavilla lisensseillä:
Voit kopioida, levittää ja/tai muuttaa tätä asiakirjaa GNU Free Documentation License -lisenssin version 1.2 tai minkä tahansa Free Software Foundationin julkaiseman myöhemmän version ehtojen alaisena; ei koske muuttumattomia kohtia, etukannen tekstejä eikä takakannen tekstejä. Kopio tästä lisenssistä on saatavilla osiossa GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
nimeäminen – Sinun on mainittava lähde asianmukaisesti, tarjottava linkki lisenssiin sekä merkittävä, mikäli olet tehnyt muutoksia. Voit tehdä yllä olevan millä tahansa kohtuullisella tavalla, mutta et siten, että annat ymmärtää lisenssinantajan suosittelevan sinua tai teoksen käyttöäsi.
jaa samoin – Jos muutat tai perustat tähän työhön, voit jakaa tuloksena syntyvää työtä vain tällä tai tämän kaltaisella lisenssillä.
Lisensointimerkintä lisätiin tähän tiedostoon osana GFDL-lisensointipäivitystä.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue
nimeäminen – Sinun on mainittava lähde asianmukaisesti, tarjottava linkki lisenssiin sekä merkittävä, mikäli olet tehnyt muutoksia. Voit tehdä yllä olevan millä tahansa kohtuullisella tavalla, mutta et siten, että annat ymmärtää lisenssinantajan suosittelevan sinua tai teoksen käyttöäsi.
jaa samoin – Jos muutat tai perustat tähän työhön, voit jakaa tuloksena syntyvää työtä vain tällä tai tämän kaltaisella lisenssillä.
{{Information |Description=This is an example of 2D FEM (Finite Element Modelling) solution for a cylindrically shaped magnetic shield. The exciting coil with current is shown on the extreme right as a slightly visible vertical rectangle. |Source=self-mad