Tiedosto:1998 OR2 Radar.gif

Tarkempaa kuvaa ei ole saatavilla.

1998_OR2_Radar.gif ‎(400 × 400 kuvapistettä, 1,08 MiB, MIME-tyyppi: image/gif, toistuva, 10 kehystä, 1,5 s)

Tämä tiedosto on tiedostotietokanta Wikimedia Commonsista. Tiedot kuvaussivulta näkyvät alla.

Tiedoston kuvaussivu Commonsissa

Tiedoston kuvaussivu Commonsissa

Yhteenveto

Kuvaus1998 OR2 Radar.gif	English: Animation of delay-Doppler images from Apr 18 UT.
Päiväys	18. huhtikuuta 2020
Lähde	http://www.naic.edu/~pradar/press/1998OR2.php
Tekijä	Arecibo Observatory/NASA/NSF

Lisenssi

	Tämä teos on ilman tekijänoikeuden suojaa, koska National Aeronautics and Space Administration (NASA) loi sen. Koska Nasa on Yhdysvaltain liittovaltion organisaatio, sen luomat teokset ovat ilman tekijänoikeuden suojaa. ([1][2])
	Varoitukset: Nasan logo ja insigniat eivät ole vapaasti käytettäviä. ([3]) Nasan Internet-sivustolla on paljon kuvia Neuvostoliiton avaruusohjelmasta, Venäjän avaruusjärjestöltä, Euroopan avaruusjärjestöltä (ESA) ja muilta avaruusjärjestöiltä tai viranomaisilta. Niiden kuvat eivät välttämättä ole tekijänoikeudesta vapaita. Hubble-teleskoopilla otetut kuvat saattavat olla tekijänoikeuden alaisia, jos ne eivät tule Space Telescope Science Institutelta (STScI). ([4]) Solar and Heliospheric Observatoryn (SOHO) kuvien käyttäminen muutoin kuin epäkaupallisesti tai opetuksellisesti vaatii luvan. ([5]) Astronomy Picture of the Day (APOD) -sivuston kuvat saattavat olla tekijänoikeuden alaisia. ([6])

Tiedoston historia

Päiväystä napsauttamalla näet, millainen tiedosto oli kyseisellä hetkellä.

	Päiväys	Pienoiskuva	Koko	Käyttäjä	Kommentti
nykyinen	23. huhtikuuta 2020 kello 20.26		400 × 400 (1,08 MiB)	Nrco0e	Uploaded a work by Arecibo Observatory/NASA/NSF from http://www.naic.edu/~pradar/press/1998OR2.php with UploadWizard

Tiedoston käyttö

Seuraava sivu käyttää tätä tiedostoa:

(52768) 1998 OR2

Tiedoston järjestelmänlaajuinen käyttö

Seuraavat muut wikit käyttävät tätä tiedostoa:

Käyttö kohteessa ar.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa arz.wikipedia.org
- (52768) 1998 OR2 (كويكب)
Käyttö kohteessa be.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa en.wikipedia.org
- (52768) 1998 OR2
- List of asteroid close approaches to Earth in 2020
Käyttö kohteessa eo.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa eu.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa hr.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa ja.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa pl.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa ru.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa sv.wikipedia.org
- 1998 OR2
Käyttö kohteessa vi.wikipedia.org
- (52768) 1998 OR2
Käyttö kohteessa www.wikidata.org
- Q8331812

Metatieto

Tämä tiedosto sisältää esimerkiksi kuvanlukijan, digikameran tai kuvankäsittelyohjelman lisäämiä lisätietoja. Kaikki tiedot eivät enää välttämättä vastaa todellisuutta, jos kuvaa on muokattu sen alkuperäisen luonnin jälkeen.

GIF-tiedoston kommentti

FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -6.45466400328587e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.82322992259287e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -6.50443183758398e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.81660055886823e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -3.99515300841813e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.91766944732808e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -9.82426371365364e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.59829185628769e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -5.33652837475529e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional 0 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.

Tiedosto:1998 OR2 Radar.gif

Yhteenveto

Lisenssi

Kuvatekstit

Kohteet, joita tässä tiedostossa esitetään

esittää

(52768) 1998 OR2

luomisajankohta

18. huhtikuu 2020

MIME-tyyppi

image/gif

tarkistussumma

9d1afd27a456ca9a88cd538f75ce6e3c02064534

tiedostokoko

1 134 988 tavu

kesto

1,5 sekunti

korkeus

400 pikseli

leveys

400 pikseli

Tiedoston historia

Tiedoston käyttö

Tiedoston järjestelmänlaajuinen käyttö

Metatieto

Navigointivalikko

Tiedosto:1998 OR2 Radar.gif

Yhteenveto

Lisenssi

Kuvatekstit

Kohteet, joita tässä tiedostossa esitetään

18. huhtikuu 2020

image/gif

9d1afd27a456ca9a88cd538f75ce6e3c02064534

1 134 988 tavu

1,5 sekunti

400 pikseli

400 pikseli

Tiedoston historia

Tiedoston käyttö

Tiedoston järjestelmänlaajuinen käyttö

Metatieto

Navigointivalikko

Haku