English: Early Bronze Age developed flat axe, probably of miniature form or possibly of Type Bandon, Variant Swinton, dating from Metalwork Assemblage IV, corresponding to Needham's (1996) Period 3, dated to 2050 - 1700BC
The axe appears to be complete (with a length of 58.5mm and a weight of 22.4g). The butt is rounded (with a width of 11mm) and the axe is of sub-rectangular section. The axe has discernible median bevels on both faces (28mm from the blade). The sides are near-parallel as far as the median bevel (where the axe has a width of 13.3mm and has a maximum thickness of 6.5mm). From the bevel, the sides are straight and divergent to the blade edge. The blade edge is moderately curved (with a width of 16.9mm) and no blade facet is now discernible, there are no flanges evident on the axe. Very little of the original surface survives with a dark brown patina; elsewhere the surface is pitted and is pale to mid green.

The axe is of a diminutive size, even for Type Bandon, Variant Swinton and it remains unclear whether the axe had a practical purpose or was votive. It is possible that the 'axe' may have been used for delicate tasks, perhaps similar to a chisel. Axes of this size and form are difficult to parallel, Schmidt & Burgess (1981) catalogue a number of small developed flat axes as Variant Swinton (p 67-8, nos. 375-380) but all examples are between 87mm and 92mm in length. Although this example is two-thirds of the size of these axes, it may have been used for a similar function.